home *** CD-ROM | disk | FTP | other *** search
- Path: erinews.ericsson.se!usenet
- From: ecsjols@klecsd.ericsson.se (Joakim Olsen)
- Newsgroups: comp.sys.amiga.graphics,comp.sys.amiga.hardware
- Subject: Re: Cybervision 16 and 24 bit modes
- Date: Fri, 01 Mar 1996 11:24:11 GMT
- Organization: Ericsson Mobile Communications AB
- Message-ID: <4h6mqf$jc3@erinews.ericsson.se>
- References: <1512.6632T1131T2194@guest.arnes.si>
- NNTP-Posting-Host: klpc012.ericsson.se
- X-Newsreader: Forte Agent .99b.112
-
- On 28 Feb 1996 17:54:42 GMT, uljff3@guest.arnes.si (Jernej Pecjak) wrote:
-
- >
- >Hi:
- >
- >I have a CV64 and I can use 8 bit modes, but 24 bits are not OK. Photogenics
- >screen tremples on 16 and 24 bit screen (except 800X600 sometimes).
- >
- >I also have problems with a corrupted pointer in 8 bit modes :-(
- >
- >And then again: I am only in 1/5 of the SSpeed module I found on Aminet. Can
- >this be because I have a 030/25 and not 060/50. Draw pixel from y machine is
- >29000 pixels/sec (like Picasso :-((() and the test module is 155000 from
- >cyberstorm. Is the faster processor sppeding the card up or is my card broken?
-
- Yes, a faster processor would certainly make specific routines like
- putpixel etc faster. I have about the same value as you on pixel/s, a
- friend of mine has a Piccolo SD64 and a 040 in his a3000, he beats the crap
- out of my CV64, but when I get my 060 I bet the results will be reversed.
- The OS-routines for drawing simple pixels, circles etc have too much
- overhead to fully use the CV64 with a 030@25MHz.
-
-
- [ Joakim Olsen
- [ e-mail, work: ecsjols@klecsd.ericsson
- [ e-mail, home: jocke@plea.se
- [ IRC, #Amiga: Cleese
- [ A3000/14Mb/1Gb/CV64(4Mb)
-
-